Gas treatment

Facilitating the recovery, treatment, and monetization of natural gas

There are inherent impurities in gas that not only accelerate the corrosion of pipelines and transmission control equipment but lower the heating value of the gas. These impurities must be removed prior to transmitting gas to a processing facility.

Our differentiating technology portfolio and expertise in process design and engineering provide the optimal gas treatment based on the parameters of your specific operation. When you're planning your next front-end engineering and design (FEED) study, we can help you make the most of your opportunity.

Acid Gas Treatment

Separate CO₂ and H₂S from saleable natural gas streams with gas sweetening processes.

Use industry-leading technologies for CO₂ and H₂S removal

Acid gas treatment and removal technologies separate sour gases—highly corrosive CO₂ and often deadly H₂S acid gases—from saleable natural gas streams in a process known as gas sweetening. Once removed, the CO₂ and H₂S are usually vented in low concentrations, flared, and then reinjected or otherwise properly disposed of. Larger concentrations of CO₂ are recovered and repurposed for enhanced oil recovery applications.

Amine Gas Treating Systems

Standard and customized gas-treating designs

Prepare natural gas for transport and use by removing CO2, H2S, and mercaptans. View
Apura

Gas separation membrane

Natural gas sweetening via H2S, H2O, and bulk CO2 removal. View
Cynara

H2S and CO2 separation membranes

Separate acid gases from produced natural gas without chemicals. View
THIOPAQ O&G

Oil and gas biodesulfurization system

Convert H2S in gas streams to solid sulfur ready for agriculture or disposal. View
Oil and Gas Production Chemicals and Services

Maximize production from reservoir to refinery

Improve and assure production more safely with chemistry technologies, software, and mechanical solutions. View
Process Live Uptime Assurance for Acid Gas Removal Membrane Systems

Data-enriched performance service

Improve performance of membrane technology through predictive monitoring and analysis. View

Emission Control Systems

Reduce emissions in natural gas facilities to comply with local environmental regulations.

Reduce emission of volatile organic compounds

Our systems enable natural gas facilities to comply with local emissions regulations.

NATCO SHV Combustor

Internal-burner emission control system

Achieve >99.9% destruction efficiency for all VOCs by using both flares and incinerators. View
NATCO SHV Flare

Emission control system

Comply with environmental regulations. View

Glycol Dehydration Systems

Extract water from a natural gas stream to prevent hydrate formation and corrosion within pipelines.

Natural Gas Liquid (NGL) Recovery

Increase your revenue while preparing gas to meet pipeline specifications.

Recover valuable hydrocarbon liquids while preparing gas to meet specifications

Our dew point control systems and NGL recovery technologies maximize hydrocarbon recovery from gas streams, increasing profitability.

Condensate Stabilizers

Standardized modular systems for NGL recovery

Recover valuable hydrocarbons and reduce stock-tank emissions View
NATCO MRU

Mechanical refrigeration unit

Improve recovery of heavier hydrocarbon fractions in the inlet gas stream. View

Phase Separation

Remove solids and liquids in gas entering a treatment facility before sending to additional processing and purification.

Flexible and highly efficient separation of liquids and solids from gas streams

Gas entering a treatment facility can contain solids and liquids, either as particulates or as a distinct phase, that must be removed before additional processing and purification.

High-Efficiency Phase Separation Internals

Enhance separation of oil, gas, sand, and water

Improve separation of oil, gas, sand, and water while reducing costs and risk. View
PORTA-TEST WHIRLYSCRUB I

Liquid removal from gases with low liquid loading

Remove liquids from gas containing low amounts of liquid, with a removal efficiency of 99.99% down to 10 um. View
PORTA-TEST WHIRLYSCRUB V

Solids and liquid removal from gases with moderate amounts of liquids

Remove solids and liquid from gas containing moderate amounts of liquid, with a removal efficiency of 99.9% down to 10 um. View